STOCK #IBR037
STEEL

TRAILER LOCATED IN DAVIDSON SASK

6.5 x 14FT BUMPER PULL DUMP TRAILER
8" I-BEAM FRAME
24" 1ga DUMP SIDES
235/80R16 10PLY TIRES
2 5/16" HEIGHT ADJUSTABLE COUPLER
DIAMOND PLATE FENDERS
10K SPRING LOADED DROP LEG JACK
SCISSOR HOIST
16" x 80" SLIDE IN RAMPS
FRONT MOUNTED TARP SYSTEM
LED LIGHTS
STANDARD WIRE HARNESS
4 WELD ON D-RINGS
SPARE TIRE MOUNT

2024 Norstar DWB14 83x14

14,000lb Dump Trailer with 8” I-Beam Frame

Our DWB dump trailer brings 8” monoframe I-beam construction into the fold, making the unit 2” shorter than our standard DTB. Built with the same rugged user in mind as our DTB model, The DWB comes in standard configurations only, but should have all the options to satisfy the needs of any serious dump user.

The models include a beefy 8” I-beam frame, 7-gauge floor, 24" 10 gauge sides with 7 machined brakes that will not bend, bow, or buckle even under the most demanding conditions. An supersized locking front toolbox with a divider ensures ample storage that will not interfere with your pump or battery. The front is capped off with a reinforced 2 5/16” coupler and standard 10k jack. A three way gate will ensure maximum flexibility for transport and dumping, while the standard tarp will make sure your loads make it to their destination. D-rings, Y-hooks, and stake pockets are also thrown in for multiple tie-down options.

This model also comes equipped with slide-in ramps, 7k electric brake axles, radial tires, and a 5 amp wall charger. 5/16 cylinder scissor hoists give you maximum lift power. All lights are sealed lifetime LEDs, and all trailers are equipped with sealed wire harnesses. These units are also backed by our industry-best IronClad warranty which covers every unit with a three year structural, two year component warranty, and two years free roadside assistance. So grab a bull by the horns and hook up to a DWB today.

Features may include:

• 8” I-Beam Frame & Tongue (10 lbs/ft )
• 4” Tubing Bed Frame
• 7 Gauge Steel Flooring
• Slide-in Ramps
• 3 x 3/16” Channel Crossmembers
• Full Length Bed Runners and Ramp Pockets
• 10 Gauge 18" or 24" Steel Sides
• Super-Sized Front Toolbox
• Standard Retractable Tarp Kit
• Weld On Diamond Plate Fenders
• 10k Drop-Leg Jack
• 3-Way Spreader Gate
• 2 5/16” Adjustable Coupler
• Cambered Brake Axles
• Multi-leaf Slipper Spring Suspension
• Black Wheels
• Radial Tires
• Spare Tire Mount
• Rear Support Stand Bracket
• Three-Way Spreader Gate
• Powdura Powder Coat & One Cure Primer
• Scissor Hoist with 516 Cylinder
• Double Acting Pump Unit w/ Gravity Down
• Flow Control Valve
• Locking Pump Box
• Standard Stake Pockets
• 4 Floor Mounted 5/8” D-Rings
• DOT Approved Lighting
• Lifetime LED Lighting
• Molded Sealed Harness with Resistors
• LED Voltage Indicator in Remote
• Built-In 5 amp Battery Charger
• 7-Way Receiver Female Plug with Adapter
• Weld-On 3/8” Safety Chains